Transfer paper

Transfer sheet can be used for polymer clay, ceramics, or other hard surfaces.

SIZE

10cm x 14.5cm (4 inch x 5 inch)

HOW TO USE TRANSFER PAPER

Getting started:

Prepare your clay by conditioning it and rolling it onto a tile surface.

Use an acrylic roller to ensure the clay is well-stuck to the tile.

Place the transfer paper colored/printed side down onto the well-conditioned clay.

Use an acrylic roller to apply light pressure and ensure the design fully contacts the clay.

Dissolve paper backing:

Take your tile with the clay slab and hold it under very low-pressure running water.

The paper backing will begin to dissolve and wash away.

Use your finger to gently rub away any remaining paper until you achieve a smooth texture.

Be careful not to apply too much pressure, as this can distort the design.

Pat dry with a paper towel.

Let the clay slab dry before cutting it. Do not cure the clay until it is fully dry.

Use a sealant:

To increase the durability of the transferred design, we recommend sealing your finished piece with a sealant such as resin for a shiny finish, or any matte sealant for a matte finish.

For best results:

Please note that the colors may slightly change during baking.

We recommend using white or light-colored clay for the most accurate colors and best results.

If you have any questions about sizing or how to use your transfer sheets, please feel free to contact us.